RM3090E _58 Vehicle Interior _008791 INTERIOR PANELS / TRIM _0049317 ROOF HEADLINING A

INTERIOR PANELS / TRIM ROOF HEADLINING INSTALLATION

CAUTION / NOTICE / HINT

HINT:: A bolt without a torque specification is shown in the standard bolt chart.; Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS201212,999999,_V1,_009232,_0050395,RM1000000004GCK,

PROCEDURE

Hide Display 66425B 1.INSTALL REAR NO. 2 SIDE RAIL SPACER LH (w/o Curtain Shield Airbag)

Attach the 3 clips to install the rear No. 2 side rail spacer LH.

Hide Display 66415B 2.INSTALL REAR NO. 2 SIDE RAIL SPACER RH (w/o Curtain Shield Airbag)

HINT:: Use the same procedure described for the LH side.

Hide Display 66425B 3.INSTALL REAR NO. 2 SIDE RAIL SPACER LH (w/ Curtain Shield Airbag)

Attach the 2 clips to install the rear No. 2 side rail spacer LH.

Attach the wire harness clamp.

Connect the rear part of the curtain shield airbag assembly LH with a new clip.

1.854,3.573 2.219,3.573 true 2.25,3.49 2.479,3.688 0.229,0.198 10 *1

Push in the pin to lock the clip.

Check that the curtain shield airbag assembly LH is not twisted.

Hide Display 66415B 4.INSTALL REAR NO. 2 SIDE RAIL SPACER RH (w/ Curtain Shield Airbag)

HINT:: Use the same procedure described for the LH side.

Hide Display 66424 5.INSTALL REAR SIDE RAIL SPACER LH (w/o Curtain Shield Airbag)

Attach the 4 clips to install the rear side rail spacer LH.

Hide Display 66414A 6.INSTALL REAR SIDE RAIL SPACER RH (w/o Curtain Shield Airbag)

HINT:: Use the same procedure described for the LH side.

Hide Display 66424 7.INSTALL REAR SIDE RAIL SPACER LH (w/ Curtain Shield Airbag)

Attach the clip to install the rear side rail spacer LH.

Install the bolt.

Install the curtain shield airbag assembly LH.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>CURTAIN SHIELD AIRBAG ASSEMBLY>INSTALLATION201212,999999,_58,_008786,_0050513,RM1000000004FWF_02_0001,

Hide Display 66414A 8.INSTALL REAR SIDE RAIL SPACER RH (w/ Curtain Shield Airbag)

HINT:: Use the same procedure described for the LH side.

Hide Display 66423A 9.INSTALL FRONT SIDE RAIL SPACER LH (w/o Curtain Shield Airbag)

Attach the 4 clips to install the front side rail spacer LH.

Hide Display 66413C 10.INSTALL FRONT SIDE RAIL SPACER RH (w/o Curtain Shield Airbag)

HINT:: Use the same procedure described for the LH side.

Hide Display 63310 11.INSTALL ROOF HEADLINING ASSEMBLY

Place the roof headlining assembly into the vehicle as shown in the illustration.

NOTICE:: Be careful not to damage the roof headlining assembly when placing it.

1.167,2.542 1.479,2.74 0.313,0.198 10 *A 2.073,2.531 2.385,2.729 0.313,0.198 10 *A

*A	w/o Sliding Roof

w/o Sliding Roof:

Install the roof headlining assembly with the 5 clips.

w/ Sliding Roof:

Install the roof headlining assembly with the 3 clips.

Attach the 3 wire harness clamps and connect the 2 connectors to the front pillar LH.

Attach the 4 wire harness clamps to the front pillar RH.

Connect the connector to the rear pillar RH.

w/ Sliding Roof:

Connect the connector.

w/ EC Mirror:

Connect the connector.

Hide Display 63318C 12.INSTALL SUN ROOF OPENING TRIM MOULDING (w/ Sliding Roof)

2.5,1.677 2.5,1.26 2.5,1.26 2.677,1.26 true 2.5,1.823 2.5,2.01 2.5,2.01 2.677,2.01 true 2.708,1.177 3.021,1.375 0.313,0.198 10 *a 2.698,1.917 3.01,2.115 0.313,0.198 10 *b

*a	Joint Portion of the Sun Roof Opening Trim Moulding
*b	Cutout of the Roof Headlining Assembly

Align the joint portion of the sun roof opening trim moulding with the cutout of the roof headlining assembly, and wedge the moulding onto the vehicle body and roof headlining to install it.

Hide Display 87834 13.INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)

Attach the 8 claws to install the inner rear view mirror cover.

Hide Display 81240 14.INSTALL NO. 1 ROOM LIGHT ASSEMBLY

Click hereVehicle Interior>LIGHTING (INT)>ROOM LIGHT>INSTALLATION201212,999999,_58,_008429,_0050313,RM1000000004F5B_01_0002,

Hide Display 74610A 15.INSTALL ASSIST GRIP SUB-ASSEMBLY

HINT:: Use the same procedure for all assist grip assemblies.

Install the 2 clips and 2 assist grip covers to the assist grip.

Attach the 2 clips to install the assist grip assembly.

Hide Display 81260A 16.INSTALL MAP LIGHT ASSEMBLY

Click hereVehicle Interior>LIGHTING (INT)>PERSONAL LIGHT>INSTALLATION201212,201510,_58,_008429,_0050312,RM1000000004F58_01_0001,

Hide Display 74348 17.INSTALL VISOR HOLDER

HINT:: Use the same procedure for both visor holders.

Attach the 2 claws.

Push in the visor holder to install it.

Hide Display 74320 18.INSTALL VISOR ASSEMBLY LH

Install the visor assembly LH with the 2 screws.

Hide Display 74310 19.INSTALL VISOR ASSEMBLY RH

HINT:: Use the same procedure described for the LH side.

Hide Display 20.INSTALL UPPER INSTRUMENT PANEL

Click hereVehicle Interior>INTERIOR PANELS / TRIM>UPPER INSTRUMENT PANEL>INSTALLATION201212,201510,_58,_008791,_0049314,RM10000000048VQ,

Hide Display 62212 21.INSTALL FRONT PILLAR GARNISH LH (w/o Curtain Shield Airbag)

Attach the 3 guides.

Attach the upper part of the front pillar garnish assembly LH and the 2 clips to install the front pillar garnish LH.

Hide Display 62211 22.INSTALL FRONT PILLAR GARNISH RH (w/o Curtain Shield Airbag)

HINT:: Use the same procedure described for the LH side.

Hide Display 62212 23.INSTALL FRONT PILLAR GARNISH LH (w/ Curtain Shield Airbag)

Install the front pillar garnish clips to the front pillar garnish LH.

HINT:: Install the front pillar garnish clips so that it faces as shown in the illustration.

1.25,0.135 1.563,0.292 0.313,0.156 10 false *a 3.573,0.135 3.885,0.292 0.313,0.156 10 false *b 5.792,0.125 6.104,0.281 0.313,0.156 10 false *b

CORRECT

INCORRECT

Attach the 3 guides.

1.115,0.406 1.427,0.563 0.313,0.156 10 false *1

*1	Front Pillar Garnish Clip

Attach the 2 front pillar garnish clips to install the front pillar garnish LH.

HINT:: Make sure that the curtain shield airbag assembly LH is not pinched.

Hide Display 62211 24.INSTALL FRONT PILLAR GARNISH RH (w/ Curtain Shield Airbag)

HINT:: Use the same procedure described for the LH side.

Hide Display 62412 25.INSTALL CENTER PILLAR GARNISH LH

Pass the front seat outer belt floor anchor through the hole of the center pillar garnish LH.

Attach the clip to install the center pillar garnish LH.

Install the 2 clips.

Hide Display 62411 26.INSTALL CENTER PILLAR GARNISH RH

HINT:: Use the same procedure described for the LH side.

Hide Display 62414A 27.INSTALL LOWER CENTER PILLAR GARNISH LH

Attach the 2 claws and 2 clips to install the lower center pillar garnish LH.

Connect the front seat outer belt floor anchor with the bolt.

Torque:: 42 N*m (428 kgf*cm, 31 ft.*lbf)

Hide Display 73233 28.INSTALL OUTER LAP BELT ANCHOR COVER

Click hereVehicle Interior>SEAT BELT>FRONT SEAT OUTER BELT ASSEMBLY>INSTALLATION201212,999999,_58,_008788,_0050327,RM1000000004F76_01_0025,

Hide Display 62413A 29.INSTALL LOWER CENTER PILLAR GARNISH RH

HINT:: Use the same procedure described for the LH side.

Hide Display 73135A 30.INSTALL SHOULDER BELT ANCHOR COVER RH

Click hereVehicle Interior>SEAT BELT>REAR CENTER SEAT OUTER BELT ASSEMBLY>INSTALLATION201212,999999,_58,_008788,_0050330,RM1000000004F7J_01_0004,

Hide Display 62480A 31.INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH

Attach the 8 clips to install the inner roof side garnish assembly LH.

Connect the rear seat outer belt shoulder anchor with the bolt.

Torque:: 42 N*m (428 kgf*cm, 31 ft.*lbf)

Hide Display 62470A 32.INSTALL INNER ROOF SIDE GARNISH ASSEMBLY RH

HINT:: Use the same procedure described for the LH side.

Hide Display 73178A 33.INSTALL SEAT BELT ANCHOR COVER CAP

Click hereVehicle Interior>SEAT BELT>REAR SEAT OUTER BELT ASSEMBLY>INSTALLATION201212,201510,_58,_008788,_0050329,RM1000000004F7F_02_0052,

Hide Display 64740E 34.INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

Connect the connector.

Attach the 4 clips and 6 claws to install the deck trim side panel assembly LH.

Install the luggage hold belt striker assembly with the bolt.

Install the tether anchor set bracket with the bolt.

Close the tether anchor set bracket cover.

Connect the rear seat outer belt floor anchor with the bolt.

Torque:: 42 N*m (428 kgf*cm, 31 ft.*lbf)

Install the 2 bolts and screw.

Hide Display 64730J 35.INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH

Attach the 4 clips and 6 claws to install the deck trim side panel assembly RH.

Install the luggage hold belt striker assembly with the bolt.

Install the tether anchor set bracket with the bolt.

Close the tether anchor set bracket cover.

Connect the rear seat outer belt floor anchor with the bolt.

Torque:: 42 N*m (428 kgf*cm, 31 ft.*lbf)

Install the 2 bolts and screw.

Hide Display 62332C 36.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

1.75,0.24 2.031,0.24 2.031,0.24 2.281,0.583 false 1.896,3.219 1.896,3.083 1.896,3.083 1.74,3.021 true 1.604,0.167 1.917,0.365 0.313,0.198 10 *1 1.833,3.24 2,3.417 0.167,0.177 10 *2

*1	Paint Mark
*2	Mark Position

Align the paint mark on the rear door opening trim weatherstrip LH with the mark position on the vehicle and install the rear door opening trim weatherstrip LH as shown in the illustration.

Hide Display 62331C 37.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

HINT:: Use the same procedure described for the LH side.

Hide Display 67918E 38.INSTALL REAR DOOR SCUFF PLATE LH

Attach the 6 clips and 2 claws to install the rear door scuff plate LH.

Hide Display 67917C 39.INSTALL REAR DOOR SCUFF PLATE RH

HINT:: Use the same procedure described for the LH side.

Hide Display 62312B 40.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

1.896,0.323 2.156,0.323 2.156,0.323 2.281,0.573 false 1.479,3.094 1.688,3.094 1.688,3.094 1.708,2.792 true 1.74,0.25 2.052,0.448 0.313,0.198 10 *1 1.323,3.021 1.635,3.219 0.313,0.198 10 *2

*1	Paint Mark
*2	Mark Position

Align the paint mark on the front door opening trim weatherstrip LH with the mark position on the vehicle and install the front door opening trim weatherstrip LH as shown in the illustration.

Hide Display 62311B 41.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH